|
|
| (42 intermediate revisions by 4 users not shown) |
| Line 1: |
Line 1: |
| − | = Introduction =
| + | This page has moved to [[:Category:Floating Elastic Plate|Floating Elastic Plate]]. |
| | | | |
| − | The floating elastic plate is one of the best studied problems in hydroelasticity. It can be used to model a range of
| + | Please change the link to the new page |
| − | physical structures such as a floating break water, an ice floe or a [[VLFS]]). The equations of motion were formulated
| |
| − | more than 100 years ago and a discussion of the problem appears in [[Stoker_1957a|Stoker 1960]]. The problem can
| |
| − | be divided into the two and three dimensional formulations which are closely related.
| |
| − | | |
| − | = Two Dimensional Problem =
| |
| − | | |
| − | = Equations of Motion =
| |
| − | | |
| − | The equation for a elastic plate which is governed by Kirkoffs equation is given
| |
| − | by the following
| |
| − | | |
| − | <math>D\frac{\partial^4 \eta}{\partial x^4} + \rho_i h \frac{\partial^2 \eta}{\partial t^2} = P</math>
| |
| − | | |
| − | where <math>D</math> is the flexural rigidity, <math>\rho_i</math> is the density of the plate,
| |
| − | <math>h</math> is the thickness of the plate (assumed constant), <math> P</math> is the pressure
| |
| − | and <math>\eta</math> is the plate displacement.
| |
| − | | |
| − | The pressure is given by the linearised Bernouilli equation at the wetted surface (assuming zero
| |
| − | pressure at the surface), i.e.
| |
| − | | |
| − | <math>P = \rho g \phi + \rho \frac{\partial \phi}{\partial t}</math>
| |
| − | | |
| − | where <math>\rho</math> is the water density and <math>g</math> is gravity, and <math>\phi</math>
| |
| − | is the velocity potential. The velocity potential is governed by Laplace's equation through out
| |
| − | the fluid domain subject to the
| |
| − | | |
| − | [[Frequency Domain Problem]]
| |
