Difference between revisions of "Green Function Methods for Floating Elastic Plates"
Line 18: | Line 18: | ||
== Transformation using [[Eigenfunctions for a Free Beam]] == | == Transformation using [[Eigenfunctions for a Free Beam]] == | ||
− | + | {{equations for a free beam}} | |
− | + | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
This solution is discussed further in [[Eigenfunctions for a Free Beam]]. | This solution is discussed further in [[Eigenfunctions for a Free Beam]]. | ||
Revision as of 08:31, 7 November 2008
Introduction
The problem of a two-dimensional Floating Elastic Plate was solved using a Free-Surface Green Function by Newman 1994 and Meylan and Squire 1994. We describe here both methods (which are closely related). A related paper was given by Hermans 2003 and we extended to multiple plates in Hermans 2004.
We present here the solution for a floating elastic plate using dry modes. We begin with the equations. The solution can also be found using Eigenfunction Matching for a Finite Floating Elastic Plate using Symmetry.
Equations for a Finite Plate in Frequency Domain
We consider the problem of small-amplitude waves which are incident on finite floating elastic plate occupying water surface for [math]\displaystyle{ -L\lt x\lt L }[/math]. These equations are derived in Floating Elastic Plate The submergence of the plate is considered negligible. We assume that the problem is invariant in the [math]\displaystyle{ y }[/math] direction. We also assume that the plate edges are free to move at each boundary, although other boundary conditions could easily be considered using the methods of solution presented here. We begin with the Frequency Domain Problem for a semi-infinite Floating Elastic Plates in the non-dimensional form of Tayler 1986 (Dispersion Relation for a Floating Elastic Plate). We also assume that the waves are normally incident (incidence at an angle will be discussed later).
where [math]\displaystyle{ \alpha = \omega^2 }[/math], [math]\displaystyle{ \beta }[/math] and [math]\displaystyle{ \gamma }[/math] are the stiffness and mass constant for the plate respectively. The free edge conditions at the edge of the plate imply
Transformation using Eigenfunctions for a Free Beam
We can find a the eigenfunction which satisfy
[math]\displaystyle{ \partial_x^4 w_n = \lambda_n^4 w_n \,\,\, -L \leq x \leq L }[/math]
plus the edge conditions of zero bending moment and shear stress
This solution is discussed further in Eigenfunctions for a Free Beam.
Expanding
[math]\displaystyle{ \frac{\partial \phi}{\partial z} = i\omega \sum_{n=0}^{\infty} \zeta_n w_n }[/math]
Equation in Terms of the Modes of the Plate
Under these assumptions, the equations become
We solve for the potential (and displacement) as the sum of the diffracted and radiation potentials in the standard way, as for a rigid body. We begin with the diffraction potential [math]\displaystyle{ \phi^{(d)} }[/math] which satisfies the following equations
Furthermore, [math]\displaystyle{ \phi^{(d)} }[/math] satisfies the Sommerfeld Radiation Condition
where [math]\displaystyle{ k }[/math] is the wavenumber, which is the positive real solution of the Dispersion Relation for a Free Surface
and [math]\displaystyle{ \phi^{\rm In} }[/math] is the incident wave given by
(which has unit amplitude in displacement) and is travelling towards positive infinity
We now consider the radiation potentials [math]\displaystyle{ \phi^{(n)} }[/math], which satisfy the following equations
The radiation condition for the radiation potential is
Therefore we find the potential as
so that
If we multiply by [math]\displaystyle{ w_m }[/math] and take an inner product over the plate we obtain
where the functions [math]\displaystyle{ a_{mn}(\omega) }[/math] and [math]\displaystyle{ b_{mn}(\omega) }[/math] are given by
and they are referred to as the added mass and damping coefficients respectively. This equation is solved by truncating the number of modes.
Solution for the Radiation and Diffracted Potential
We use the Free-Surface Green Function for two-dimensional waves, with singularity at the water surface since we are only interested in its value at [math]\displaystyle{ z=0. }[/math] Using this we can transform the system of equations to
and
Details about this method can be found in Integral Equation for the Finite Depth Green Function at Surface.
Alternative Solution Method using Green Function for the Plate
We can also solve the equation by a closely related method which was given in Meylan and Squire 1994. We can transform the equations to
Expanding as before
[math]\displaystyle{ \frac{\partial \phi}{\partial z} = i\omega \sum \xi_n w_n }[/math]
we obtain
This leads to the following equation
[math]\displaystyle{ \phi(x) = \frac{1}{\alpha} \int_{-b}^{b} \frac{w_n(x)w_n(\xi)}{\beta\lambda_n^4 - \gamma\alpha + 1}\phi_z(\xi)d\xi }[/math]
or
[math]\displaystyle{ \phi(x) = \frac{1}{\alpha} \int_{-b}^{b} g(x,\xi)\phi_z(\xi)d\xi }[/math]
where
[math]\displaystyle{ g(x,\xi) = \frac{w_n(x)w_n(\xi)}{\beta\lambda_n^4 - \gamma\alpha + 1} }[/math]