Kagemoto and Yue Interaction Theory
Introduction
This is an interaction theory which provides the exact solution (i.e. it is not based on a Wide Spacing Approximation). The theory uses the Cylindrical Eigenfunction Expansion and Graf's Addition Theorem to represent the potential in local coordinates. The incident and scattered potential of each body are then related by the associated Diffraction Transfer Matrix.
The basic idea is as follows: The scattered potential of each body is represented in the Cylindrical Eigenfunction Expansion associated with the local coordinates centred at the mean centre position of the body. Using Graf's Addition Theorem, the scattered potential of all bodies (given in their local coordinates) can be mapped to an incident potential associated with the coordiates of all other bodies. Doing this, the incident potential of each body (which is given by the ambient incident potential plus the scattered potentials of all other bodies) is given in the Cylindrical Eigenfunction Expansion associated with its local coordinates. Using the Diffraction Transfer Matrix, which relates the incident and scattered potential of each body in isolation, a system of equations for the coefficients of the scattered potentials of all bodies is obtained.
The theory is described in Kagemoto and Yue 1986 and in Peter and Meylan 2004.
We extend the finite depth interaction theory of kagemoto86 to water of infinite depth and bodies of arbitrary geometry. The sum over the discrete roots of the dispersion equation in the finite depth theory becomes an integral in the infinite depth theory. This means that the infinite dimensional diffraction transfer matrix in the finite depth theory must be replaced by an integral operator. In the numerical solution of the equations, this integral operator is approximated by a sum and a linear system of equations is obtained. We also show how the calculations of the diffraction transfer matrix for bodies of arbitrary geometry developed by goo90 can be extended to infinite depth, and how the diffraction transfer matrix for rotated bodies can be easily calculated. This interaction theory is applied to the wave forcing of multiple ice floes and a method to solve the full diffraction problem in this case is presented. Convergence studies comparing the interaction method with the full diffraction calculations and the finite and infinite depth interaction methods are carried out.
The extension of Kagemoto and Yue's interaction theory to bodies of arbitrary shape in water of infinite depth
kagemoto86 developed an interaction theory for vertically non-overlapping axisymmetric structures in water of finite depth. While their theory was valid for bodies of arbitrary geometry, they did not develop all the necessary details to apply the theory to arbitrary bodies. The only requirements to apply this scattering theory is that the bodies are vertically non-overlapping and that the smallest cylinder which completely contains each body does not intersect with any other body. In this section we will extend their theory to bodies of arbitrary geometry in water of infinite depth. The extension of \citeauthor{kagemoto86}'s finite depth interaction theory to bodies of arbitrary geometry was accomplished by goo90.
The interaction theory begins by representing the scattered potential
of each body in the cylindrical eigenfunction expansion. Furthermore,
the incoming potential is also represented in the cylindrical
eigenfunction expansion. The operator which maps the incoming and
outgoing representation is called the diffraction transfer matrix and
is different for each body.
Since these representations are local to each body, a mapping of
the eigenfunction representations between different bodies
is required. This operator is called the coordinate transformation
matrix.
The cylindrical eigenfunction expansions will be introduced before we derive a system of equations for the coefficients of the scattered wavefields. Analogously to kagemoto86, we represent the scattered wavefield of each body as an incoming wave upon all other bodies. The addition of the ambient incident wave yields the complete incident potential and with the use of diffraction transfer matrices which relate the coefficients of the incident potential to those of the scattered wavefield a system of equations for the unknown coefficients of the scattered wavefields of all bodies is derived.
Eigenfunction expansion of the potential
The equations of motion for the water are derived from the linearised inviscid theory. Under the assumption of irrotational motion the velocity vector field of the water can be written as the gradient field of a scalar velocity potential [math]\displaystyle{ \Phi }[/math]. Assuming that the motion is time-harmonic with the radian frequency [math]\displaystyle{ \omega }[/math] the velocity potential can be expressed as the real part of a complex quantity,
To simplify notation, [math]\displaystyle{ \mathbf{y} = (x,y,z) }[/math] will always denote a point in the water, which is assumed infinitely deep, while [math]\displaystyle{ \mathbf{x} }[/math] will always denote a point of the undisturbed water surface assumed at [math]\displaystyle{ z=0 }[/math].
The problem consists of [math]\displaystyle{ N }[/math] vertically non-overlapping bodies, denoted by [math]\displaystyle{ \Delta_j }[/math], which are sufficiently far apart that there is no intersection of the smallest cylinder which contains each body with any other body. Each body is subject to an incident wavefield which is incoming, responds to this wavefield and produces a scattered wave field which is outgoing. Both the incident and scattered potential corresponding to these wavefields can be represented in the cylindrical eigenfunction expansion valid outside of the escribed cylinder of the body. Let [math]\displaystyle{ (r_j,\theta_j,z) }[/math] be the local cylindrical coordinates of the [math]\displaystyle{ j }[/math]th body, [math]\displaystyle{ \Delta_j }[/math], [math]\displaystyle{ j \in \{1, \ldots , N\} }[/math], and [math]\displaystyle{ \alpha =\omega^2/g }[/math] where [math]\displaystyle{ g }[/math] is the acceleration due to gravity. Figure (fig:floe_tri) shows these coordinate systems for two bodies.
The scattered potential of body [math]\displaystyle{ \Delta_j }[/math] can be expanded in cylindrical eigenfunctions,
where the coefficients [math]\displaystyle{ A_{0 \nu}^j }[/math] for the propagating modes are discrete and the coefficients [math]\displaystyle{ A_{\nu}^j (\cdot) }[/math] for the decaying modes are functions. [math]\displaystyle{ H_\nu^{(1)} }[/math] and [math]\displaystyle{ K_\nu }[/math] are the Hankel function of the first kind and the modified Bessel function of the second kind respectively, both of order [math]\displaystyle{ \nu }[/math] as defined in Abramowitz and Stegun 1964. The incident potential upon body [math]\displaystyle{ \Delta_j }[/math] can be expanded in cylindrical eigenfunctions,
where the coefficients [math]\displaystyle{ D_{0 \mu}^j }[/math] for the propagating modes are discrete and the coefficients [math]\displaystyle{ D_{\mu}^j (\cdot) }[/math] for the decaying modes are functions. [math]\displaystyle{ J_\mu }[/math] and [math]\displaystyle{ I_\mu }[/math] are the Bessel function and the modified Bessel function respectively, both of the first kind and order [math]\displaystyle{ \mu }[/math]. To simplify the notation, from now on [math]\displaystyle{ \psi(z,\eta) }[/math] will denote the vertical eigenfunctions corresponding to the decaying modes,
The interaction in water of infinite depth
Following the ideas of kagemoto86, a system of equations for the unknown coefficients and coefficient functions of the scattered wavefields will be developed. This system of equations is based on transforming the scattered potential of [math]\displaystyle{ \Delta_j }[/math] into an incident potential upon [math]\displaystyle{ \Delta_l }[/math] ([math]\displaystyle{ j \neq l }[/math]). Doing this for all bodies simultaneously, and relating the incident and scattered potential for each body, a system of equations for the unknown coefficients will be developed.
The scattered potential [math]\displaystyle{ \phi_j^{\mathrm{S}} }[/math] of body [math]\displaystyle{ \Delta_j }[/math] needs to be represented in terms of the incident potential [math]\displaystyle{ \phi_l^{\mathrm{I}} }[/math] upon [math]\displaystyle{ \Delta_l }[/math], [math]\displaystyle{ j \neq l }[/math]. From figure (fig:floe_tri) we can see that this can be accomplished by using Graf's addition theorem for Bessel functions given in Abramowitz and Stegun 1964,
</math>
which is valid provided that [math]\displaystyle{ r_l \lt R_{jl} }[/math]. This limitation only requires that the escribed cylinder of each body [math]\displaystyle{ \Delta_l }[/math] does not enclose any other origin [math]\displaystyle{ O_j }[/math] ([math]\displaystyle{ j \neq l }[/math]). However, the expansion of the scattered and incident potential in cylindrical eigenfunctions is only valid outside the escribed cylinder of each body. Therefore the condition that the escribed cylinder of each body [math]\displaystyle{ \Delta_l }[/math] does not enclose any other origin [math]\displaystyle{ O_j }[/math] ([math]\displaystyle{ j \neq l }[/math]) is superseded by the more rigorous restriction that the escribed cylinder of each body may not contain any other body. Making use of the equations (transf) the scattered potential of [math]\displaystyle{ \Delta_j }[/math] can be expressed in terms of the incident potential upon [math]\displaystyle{ \Delta_l }[/math],
The ambient incident wavefield [math]\displaystyle{ \phi^{\mathrm{In}} }[/math] can also be expanded in the eigenfunctions corresponding to the incident wavefield upon [math]\displaystyle{ \Delta_l }[/math]. A detailed illustration of how to accomplish this will be given later. Let [math]\displaystyle{ D_{l0\mu}^{\mathrm{In}} }[/math] denote the coefficients of this ambient incident wavefield corresponding to the propagating modes and [math]\displaystyle{ D_{l\mu}^{\mathrm{In}} (\cdot) }[/math] denote the coefficients functions corresponding to the decaying modes (which are identically zero) of the incoming eigenfunction expansion for [math]\displaystyle{ \Delta_l }[/math]. The total incident wavefield upon body [math]\displaystyle{ \Delta_j }[/math] can now be expressed as
The coefficients of the total incident potential upon [math]\displaystyle{ \Delta_l }[/math] are therefore given by
Temp break
In general, it is possible to relate the total incident and scattered partial waves for any body through the diffraction characteristics of that body in isolation. There exist diffraction transfer operators [math]\displaystyle{ B_l }[/math] that relate the coefficients of the incident and scattered partial waves, such that
where [math]\displaystyle{ A_l }[/math] are the scattered modes due to the incident modes [math]\displaystyle{ D_l }[/math]. In the case of a countable number of modes, (i.e. when the depth is finite), [math]\displaystyle{ B_l }[/math] is an infinite dimensional matrix. When the modes are functions of a continuous variable (i.e. infinite depth), [math]\displaystyle{ B_l }[/math] is the kernel of an integral operator. For the propagating and the decaying modes respectively, the scattered potential can be related by diffraction transfer operators acting in the following ways,
The superscripts [math]\displaystyle{ \mathrm{p} }[/math] and [math]\displaystyle{ \mathrm{d} }[/math] are used to distinguish between propagating and decaying modes, the first superscript denotes the kind of scattered mode, the second one the kind of incident mode. If the diffraction transfer operators are known (their calculation will be discussed later), the substitution of equations (inc_coeff) into equations (diff_op) give the required equations to determine the coefficients and coefficient functions of the scattered wavefields of all bodies,
[math]\displaystyle{ n \in \mathds{Z},\, l = 1, \ldots, N }[/math]. It has to be noted that all equations are coupled so that it is necessary to solve for all scattered coefficients and coefficient functions simultaneously.
For numerical calculations, the infinite sums have to be truncated and the integrals must be discretised. Implying a suitable truncation, the four different diffraction transfer operators can be represented by matrices which can be assembled in a big matrix [math]\displaystyle{ \mathbf{B}_l }[/math],
the infinite depth diffraction transfer matrix. Truncating the coefficients accordingly, defining [math]\displaystyle{ {\mathbf a}^l }[/math] to be the vector of the coefficients of the scattered potential of body [math]\displaystyle{ \Delta_l }[/math], [math]\displaystyle{ \mathbf{d}_l^{\mathrm{In}} }[/math] to be the vector of coefficients of the ambient wavefield, and making use of a coordinate transformation matrix [math]\displaystyle{ {\mathbf T}_{jl} }[/math] given by
</math>
for the decaying modes, a linear system of equations for the unknown coefficients follows from equations (eq_op),
where the left superscript [math]\displaystyle{ \mathrm{t} }[/math] indicates transposition. The matrix [math]\displaystyle{ {\mathbf \hat{B}}_l }[/math] denotes the infinite depth diffraction transfer matrix [math]\displaystyle{ {\mathbf B}_l }[/math] in which the elements associated with decaying scattered modes have been multiplied with the appropriate integration weights depending on the discretisation of the continuous variable.
\subsection{Calculation of the diffraction transfer matrix for bodies of arbitrary geometry}
Before we can apply the interaction theory we require the diffraction transfer matrices [math]\displaystyle{ \mathbf{B}_j }[/math] which relate the incident and the scattered potential for a body [math]\displaystyle{ \Delta_j }[/math] in isolation. The elements of the diffraction transfer matrix, [math]\displaystyle{ ({\mathbf B}_j)_{pq} }[/math], are the coefficients of the [math]\displaystyle{ p }[/math]th partial wave of the scattered potential due to a single unit-amplitude incident wave of mode [math]\displaystyle{ q }[/math] upon [math]\displaystyle{ \Delta_j }[/math].
While \citeauthor{kagemoto86}'s interaction theory was valid for bodies of arbitrary shape, they did not explain how to actually obtain the diffraction transfer matrices for bodies which did not have an axisymmetric geometry. This step was performed by goo90 who came up with an explicit method to calculate the diffraction transfer matrices for bodies of arbitrary geometry in the case of finite depth. Utilising a Green's function they used the standard method of transforming the single diffraction boundary-value problem to an integral equation for the source strength distribution function over the immersed surface of the body. However, the representation of the scattered potential which is obtained using this method is not automatically given in the cylindrical eigenfunction expansion. To obtain such cylindrical eigenfunction expansions of the potential goo90 used the representation of the free surface finite depth Green's function given by black75 and fenton78. \citeauthor{black75} and \citeauthor{fenton78}'s representation of the Green's function was based on applying Graf's addition theorem to the eigenfunction representation of the free surface finite depth Green's function given by john2. Their representation allowed the scattered potential to be represented in the eigenfunction expansion with the cylindrical coordinate system fixed at the point of the water surface above the mean centre position of the body.
It should be noted that, instead of using the source strength distribution function, it is also possible to consider an integral equation for the total potential and calculate the elements of the diffraction transfer matrix from the solution of this integral equation. An outline of this method for water of finite depth is given by kashiwagi00. We will present here a derivation of the diffraction transfer matrices for the case infinite depth based on a solution for the source strength distribution function. However, an equivalent derivation would be possible based on the solution for the total velocity potential.
To calculate the diffraction transfer matrix in infinite depth, we require the representation of the infinite depth free surface Green's function in cylindrical eigenfunctions,
[math]\displaystyle{ r \gt s }[/math], given by malte03.
We assume that we have represented the scattered potential in terms of the source strength distribution [math]\displaystyle{ \varsigma^j }[/math] so that the scattered potential can be written as
where [math]\displaystyle{ D }[/math] is the volume occupied by the water and [math]\displaystyle{ \Gamma_j }[/math] is the immersed surface of body [math]\displaystyle{ \Delta_j }[/math]. The source strength distribution function [math]\displaystyle{ \varsigma^j }[/math] can be found by solving an integral equation. The integral equation is described in Weh_Lait and numerical methods for its solution are outlined in Sarp_Isa. Substituting the eigenfunction expansion of the Green's function
(green_inf) into (int_eq_1), the scattered potential can
be written as
where [math]\displaystyle{ \mathbf{\zeta}=(s,\varphi,c) }[/math] and [math]\displaystyle{ r\gt s }[/math]. This restriction implies that the eigenfunction expansion is only valid outside the escribed cylinder of the body.
Temp break
The columns of the diffraction transfer matrix are the coefficients of the eigenfunction expansion of the scattered wavefield due to the different incident modes of unit-amplitude. The elements of the diffraction transfer matrix of a body of arbitrary shape are therefore given by
</math>
for the propagating and the decaying modes respectively, where [math]\displaystyle{ \varsigma_q^j(\mathbf{\zeta}) }[/math] is the source strength distribution due to an incident potential of mode [math]\displaystyle{ q }[/math] of the form
</math>
for the decaying modes.
The diffraction transfer matrix of rotated bodies
For a non-axisymmetric body, a rotation about the mean centre position in the [math]\displaystyle{ (x,y) }[/math]-plane will result in a different diffraction transfer matrix. We will show how the diffraction transfer matrix of a body rotated by an angle [math]\displaystyle{ \beta }[/math] can be easily calculated from the diffraction transfer matrix of the non-rotated body. The rotation of the body influences the form of the elements of the diffraction transfer matrices in two ways. Firstly, the angular dependence in the integral over the immersed surface of the body is altered and, secondly, the source strength distribution function is different if the body is rotated. However, the source strength distribution function of the rotated body can be obtained by calculating the response of the non-rotated body due to rotated incident potentials. It will be shown that the additional angular dependence can be easily factored out of the elements of the diffraction transfer matrix.
The additional angular dependence caused by the rotation of the incident potential can be factored out of the normal derivative of the incident potential such that
where [math]\displaystyle{ \phi_{q\beta}^{\mathrm{I}} }[/math] is the rotated incident potential. Since the integral equation for the determination of the source strength distribution function is linear, the source strength distribution function due to the rotated incident potential is thus just given by
This is also the source strength distribution function of the rotated body due to the standard incident modes.
The elements of the diffraction transfer matrix [math]\displaystyle{ \mathbf{B}_j }[/math] are given by equations (B_elem). Keeping in mind that the body is rotated by the angle [math]\displaystyle{ \beta }[/math], the elements of the diffraction transfer matrix of the rotated body are given by
and
for the propagating and decaying modes respectively.
Thus the additional angular dependence caused by the rotation of the body can be factored out of the elements of the diffraction transfer matrix. The elements of the diffraction transfer matrix corresponding to the body rotated by the angle [math]\displaystyle{ \beta }[/math], [math]\displaystyle{ \mathbf{B}_j^\beta }[/math], are given by
As before, [math]\displaystyle{ (\mathbf{B})_{pq} }[/math] is understood to be the element of [math]\displaystyle{ \mathbf{B} }[/math] which corresponds to the coefficient of the [math]\displaystyle{ p }[/math]th scattered mode due to a unit-amplitude incident wave of mode [math]\displaystyle{ q }[/math]. Equation (B_rot) applies to propagating and decaying modes likewise.
Representation of the ambient wavefield in the eigenfunction representation
In Cartesian coordinates centred at the origin, the ambient wavefield is given by
where [math]\displaystyle{ A }[/math] is the amplitude (in displacement) and [math]\displaystyle{ \chi }[/math] is the angle between the [math]\displaystyle{ x }[/math]-axis and the direction in which the wavefield travels. The interaction theory requires that the ambient wavefield, which is incident upon all bodies, is represented in the eigenfunction expansion of an incoming wave in the local coordinates of the body. The ambient wave can be represented in an eigenfunction expansion centred at the origin as
\cite[p. 169]{linton01}. Since the local coordinates of the bodies are centred at their mean centre positions [math]\displaystyle{ O_l = (O_x^l,O_y^l) }[/math], a phase factor has to be defined which accounts for the position from the origin. Including this phase factor the ambient wavefield at the [math]\displaystyle{ l }[/math]th body is given by
Solving the resulting system of equations
After the coefficient vector of the ambient incident wavefield, the diffraction transfer matrices and the coordinate transformation matrices have been calculated, the system of equations (eq_B_inf), has to be solved. This system can be represented by the following matrix equation,
where [math]\displaystyle{ \mathbf{0} }[/math] denotes the zero-matrix which is of the same dimension as [math]\displaystyle{ {{\mathbf B}}_j }[/math], say [math]\displaystyle{ n }[/math]. This matrix equation can be easily transformed into a classical [math]\displaystyle{ (N \, n) }[/math]-dimensional linear system of equations.
Finite Depth Interaction Theory
We will compare the performance of the infinite depth interaction theory with the equivalent theory for finite depth. As we have stated previously, the finite depth theory was developed by Kagemoto and Yue 1986 and extended to bodies of arbitrary geometry by Goo and Yoshida 1990. We will briefly present this theory in our notation and the comparisons will be made in a later section.
In water of constant finite depth [math]\displaystyle{ d }[/math], the scattered potential of a body [math]\displaystyle{ \Delta_j }[/math] can be expanded in cylindrical eigenfunctions,
with discrete coefficients [math]\displaystyle{ A_{m \nu}^j }[/math]. The positive wavenumber [math]\displaystyle{ k }[/math] is related to [math]\displaystyle{ \alpha }[/math] by the Dispersion Relation for a Free Surface
and the values of [math]\displaystyle{ k_m }[/math], [math]\displaystyle{ m\gt 0 }[/math], are given as positive real roots of Dispersion Relation for a Free Surface
The incident potential upon body [math]\displaystyle{ \Delta_j }[/math] can be also be expanded in cylindrical eigenfunctions,
with discrete coefficients [math]\displaystyle{ D_{m\mu}^j }[/math]. A system of equations for the coefficients of the scattered wavefields for the bodies are derived in an analogous way to the infinite depth case. The derivation is simpler because all the coefficients are discrete and the diffraction transfer operator can be represented by an infinite dimensional matrix. Truncating the infinite dimensional matrix as well as the coefficient vectors appropriately, the resulting system of equations is given by
where [math]\displaystyle{ {\mathbf a}_l }[/math] is the coefficient vector of the scattered wave, [math]\displaystyle{ {\mathbf d}_l^\mathrm{In} }[/math] is the coefficient vector of the ambient incident wave, [math]\displaystyle{ {\mathbf B}_l }[/math] is the diffraction transfer matrix of [math]\displaystyle{ \Delta_l }[/math] and [math]\displaystyle{ {\mathbf T}_{jl} }[/math] is the coordinate transformation matrix analogous to (T_elem_deep).
The calculation of the diffraction transfer matrices is also similar to the infinite depth case. Free-Surface Green Function for Finite Depth in cylindrical polar coordinates
given by Black 1975 and Fenton 1978, needs to be used instead of the infinite depth Green's function (green_inf). The elements of [math]\displaystyle{ {\mathbf B}_j }[/math] are therefore given by
and
for the propagating and the decaying modes respectively, where [math]\displaystyle{ \varsigma_q^j(\mathbf{\zeta}) }[/math] is the source strength distribution due to an incident potential of mode [math]\displaystyle{ q }[/math] of the form
for the propagating modes, and
for the decaying modes.