Difference between revisions of "Linear Wave-Body Interaction"

From WikiWaves
Jump to navigationJump to search
 
(28 intermediate revisions by 2 users not shown)
Line 9: Line 9:
 
[[Image:Rigid_body.jpg|thumb|right|600px|Rigid body motions]]
 
[[Image:Rigid_body.jpg|thumb|right|600px|Rigid body motions]]
  
We consider a [[Linear Plane Progressive Regular Waves|Linear Plane Progressive Regular Wave]] interacting with a floating body in two dimensions (the main concepts survive almost with no change in the more practical three-dimensional problem).
+
We consider a [[Linear Plane Progressive Regular Waves|Linear Plane Progressive Regular Wave]] in the
 +
[[Frequency Domain Problem|Frequency Domain]] interacting with a floating body in two dimensions (the main concepts survive almost with no change in the more practical three-dimensional problem).
  
 
== Introduction ==
 
== Introduction ==
Line 31: Line 32:
 
can be found from the time domain equations and we introduce the following notation
 
can be found from the time domain equations and we introduce the following notation
 
<center><math>
 
<center><math>
\xi_{\nu} = \zeta_{\nu}e^{\mathrm{i}\omega t}\,
+
\xi_{\nu} = \zeta_{\nu}e^{-\mathrm{i}\omega t}\,
 
</math></center>
 
</math></center>
 
This give us
 
This give us
 
{{standard linear wave scattering equations without body condition}}
 
{{standard linear wave scattering equations without body condition}}
 
<center><math>
 
<center><math>
-\omega^2 \sum_{\nu} M_{\mu\nu}\zeta_{\nu}=-\mathrm{i}\omega\rho\iint_{\partial\Omega}\phi n_{\mu}\, dS
+
-\omega^2 \sum_{\nu} M_{\mu\nu}\zeta_{\nu}=\mathrm{i}\omega\rho\iint_{\partial\Omega}\phi n_{\mu}\, \mathrm{d}S
 
- \sum_{\nu} C_{\mu\nu}\zeta_{\nu},\quad \textrm{for} \qquad \mu=1,3,5,
 
- \sum_{\nu} C_{\mu\nu}\zeta_{\nu},\quad \textrm{for} \qquad \mu=1,3,5,
 
</math></center>
 
</math></center>
Line 50: Line 51:
  
 
We decompose the potential as
 
We decompose the potential as
<center>
 
 
<math>
 
<math>
\phi = \phi^{\mathrm{I}} + \phi^{\mathrm{D}}
+
\phi = \phi^{\mathrm{I}} + \phi^{\mathrm{D}} \,,
 
</math>
 
</math>
</center>
 
 
where <math>\phi^{\mathrm{I}}</math> is the incident potential and <math>\phi^{\mathrm{D}}</math>
 
where <math>\phi^{\mathrm{I}}</math> is the incident potential and <math>\phi^{\mathrm{D}}</math>
 
is the diffracted potential.  The boundary condition for the diffracted potential is
 
is the diffracted potential.  The boundary condition for the diffracted potential is
 
<center><math>
 
<center><math>
\Delta\phi^{\mathrm{D}}=0, \, -h<z<0,\,\,\,\mathbf{x} \in \Omega
+
\begin{align}
</math></center>
+
\Delta\phi^{\mathrm{D}}&=0, &-h<z<0,\,\,\mathbf{x} \in \Omega \\
<center><math>
+
\partial_n\phi^{\mathrm{D}} &= 0, &z=-h, \\
\partial_n\phi^{\mathrm{D}} = 0, \, z=-h,
+
\partial_n \phi^{\mathrm{D}}  &= \alpha \phi, &z=0,\,\,\mathbf{x} \in \partial\Omega_{F},  
</math></center>
+
\end{align}
<center><math>
 
\partial_n \phi^{\mathrm{D}}  = \alpha \phi,\,z=0,\,\,\mathbf{x} \in \partial\Omega_{F},
 
 
</math></center>
 
</math></center>
 
plus  
 
plus  
 
<center><math>
 
<center><math>
  \partial_n \phi^{\mathrm{D}}  = - \partial_n \phi^{\mathrm{I}},\,\, \mathbf{x} \in \partial\Omega,
+
  \partial_n \phi^{\mathrm{D}}  = - \partial_n \phi^{\mathrm{I}},\,\, \mathbf{x} \in \partial\Omega_{B},
 
</math></center>
 
</math></center>
  
Line 91: Line 88:
 
<math>\phi_\nu^{\mathrm{R}}</math> and the total potential is written as
 
<math>\phi_\nu^{\mathrm{R}}</math> and the total potential is written as
 
<center><math>
 
<center><math>
\phi = \phi^{\mathrm{I}} +  \phi^{\mathrm{D}} +
+
\phi = \phi^{\mathrm{I}} +  \phi^{\mathrm{D}} - \mathrm{i} \omega
 
\sum_\nu \zeta_\nu \phi_\nu^{\mathrm{R}}
 
\sum_\nu \zeta_\nu \phi_\nu^{\mathrm{R}}
 
</math>
 
</math>
Line 100: Line 97:
 
We substitute the expansion for the potential into the equations in the frequency domain and we obtain
 
We substitute the expansion for the potential into the equations in the frequency domain and we obtain
 
<center><math>
 
<center><math>
-\omega^2 \sum_{\nu} M_{\mu\nu}\zeta_{\nu}=-\mathrm{i}\omega\rho\iint_{\partial\Omega_{B}}
+
-\omega^2 \sum_{\nu} M_{\mu\nu}\zeta_{\nu}=\mathrm{i}\omega\rho\iint_{\partial\Omega_{B}}
\left(\phi^{\mathrm{I}} +  \phi^{\mathrm{D}} +
+
\left(\phi^{\mathrm{I}} +  \phi^{\mathrm{D}} - \mathrm{i}\omega
\sum_{\nu} \zeta_\nu \phi_{\nu}^{\mathrm{R}}\right) n_{\mu}\, dS
+
\sum_{\nu} \zeta_\nu \phi_{\nu}^{\mathrm{R}}\right) \mathbf{n}_{\mu}\, dS
 
- \sum_{\nu}  C_{\mu\nu}\xi_{\nu},\quad \textrm{for} \qquad \mu=1,3,5,
 
- \sum_{\nu}  C_{\mu\nu}\xi_{\nu},\quad \textrm{for} \qquad \mu=1,3,5,
 
</math></center>
 
</math></center>
  
We then define the matrices
+
{{added mass damping and force matrices definition}}
<center><math>
+
 
A_{\mu\nu} = \mathrm{Re} \left\{ -\frac{\mathrm{i}}{\omega}\rho\iint_{\partial\Omega_{B}}
+
Then the equations can be expressed as follows.
\phi_{\nu}^{\mathrm{R}} n_{\mu}\, dS \right\}
+
<center><math>  \left[-\omega^2 \left(\mathbf{M} + \mathbf{A} \right) -
</math></center>
 
which is called the added mass matrix and  
 
We then define the matrices
 
<center><math>
 
B_{\mu\nu} = \mathrm{Im} \left\{ \rho\iint_{\partial\Omega_{B}}
 
\phi_{\nu}^{\mathrm{R}} n_{\mu}\, dS \right\}
 
</math></center>
 
which is called the damping matrix and the forcing vector is
 
<center><math>
 
f_{\mu} = -\mathrm{i}\omega\rho\iint_{\partial\Omega_{B}}
 
\left(\phi^{\mathrm{I}} +  \phi^{\mathrm{D}} \right) n_{\mu}\, dS
 
</math></center>
 
then the equations can be expressed as follows.
 
<center><math>  \left[-\omega^2 \left(\mathbf{M} + \mathbf{A} \right) +
 
 
\mathrm{i}\omega \mathbf{B} + \mathbf{C} \right] \vec{\zeta} = \mathbf{f} </math></center>
 
\mathrm{i}\omega \mathbf{B} + \mathbf{C} \right] \vec{\zeta} = \mathbf{f} </math></center>
 
where <math>\mathbf{M}</math> is the mass matrix,  <math>\mathbf{A}</math> is the added mass matrix,
 
where <math>\mathbf{M}</math> is the mass matrix,  <math>\mathbf{A}</math> is the added mass matrix,
Line 134: Line 117:
 
== Symmetric body ==
 
== Symmetric body ==
  
For a body which is symmetric about the <math> X = 0\,</math> axis.
+
For a body which is [[:Category:Symmetry in Two Dimensions|Symmetric in Two Dimensions]]
 
the Heave is decoupled from Surge and Roll.  
 
the Heave is decoupled from Surge and Roll.  
In other words the Surge and Roll motions do not influence Heave and vice versa:
+
In other words the Surge and Roll motions do not influence Heave and vice versa.
 
 
  
 
== Matlab Code ==
 
== Matlab Code ==
  
  
*A program to solve for pitch and heave and only for two geometries can be found here [http://www.math.auckland.ac.nz/~meylan/code/boundary_element/rigid_body_motions.m rigid_body_motions.m]
+
*A program to solve for pitch and heave and only for two geometries can be found here [http://www.math.auckland.ac.nz/~meylan/code/boundary_element/rigid_body_motion.m rigid_body_motion.m]
  
 
* a program to calculate the solution for a specific geometry (with plot as output as shown) can be found here [http://www.math.auckland.ac.nz/~meylan/code/boundary_element/wave_bem_example_floating.m wave_bem_example_floating.m]  
 
* a program to calculate the solution for a specific geometry (with plot as output as shown) can be found here [http://www.math.auckland.ac.nz/~meylan/code/boundary_element/wave_bem_example_floating.m wave_bem_example_floating.m]  
  
[[Image:Wave_bem_example_floating_RT.jpg|300px|right|thumb|The reflection (solid line) and transmission (dashed line)
+
[[Image:Wave_bem_example_floating_RT2.jpg|300px|right|thumb|The reflection (solid line) and transmission (dashed line)
 
for a dock for heave and pitch (red), heave only (blue) and pitch only (black)]]
 
for a dock for heave and pitch (red), heave only (blue) and pitch only (black)]]
  
Line 157: Line 139:
 
* {{free surface dispersion equation code}}
 
* {{free surface dispersion equation code}}
 
* {{boundary element code}}
 
* {{boundary element code}}
 
== Symmetric body ==
 
 
For a body which is symmetric about the <math> X = 0\,</math> axis.
 
the Heave is decoupled from Surge and Roll.
 
In other words the Surge and Roll motions do not influence Heave and vice versa:
 
<center><math>
 
\left[ -\omega^2 \left( M + A_{33} \right) + i\omega B_{33} + C_{33} \right] \Pi_3 = A
 
</math></center>
 
 
* The only nonzero hydrostatic coefficients are <math> C_{33} \, </math> and <math> C_{44} \, </math>. Verify that this is the case even for non-symmetric sections.
 
 
* Surge and Roll are coupled for symmetric and non-symmetric bodies. The coupled equation of motion becomes:
 
 
<u>Surge-Roll</u>
 
 
<center><math> \sum_{j=1,4} \left[ -\omega^2 \left( M_{ij} + A_{ij} \right) + i\omega B_{ij} + C_{ij} \right] \Pi_j = \mathbf{X}_i, \quad i,j = 1,4 </math></center>
 
 
* When Newton's law is expressed about the center of gravity:
 
 
<center><math> M_{14} = M_{41} = 0, \ M_{11} = M, \ M_{44} = I_G </math></center>
 
 
where <math> I_G\,</math> is the body moment of inertia about the center of gravity. If the equations are to be expressed about the origin of the coordinate system, then the formulation must start with respect to <math> G\,</math> and expressions derived w.r.t. <math> O \,</math>, via a coordinate transformation.
 
 
* The exciting forces <math> \mathbf{X}_1, \mathbf{X}_3 \,</math> are defined in an obvious manner along the X- and Z-axis. The Roll moment <math> \mathbf{X}_4 \, </math> is defined initially about <math> G\,</math>.
 
 
Need to derive definitions for the coefficients that enter the Heave & Surge-Roll equations of motion:
 
 
<center><math> M = \rho \forall, \qquad \forall = \ </math> volume of water displaced by body (archimedian principle of buoyancy) </center>
 
 
<center><math> C_{33} = \rho g A_\omega = \rho g B, </math></center>
 
 
<center><math> A_\omega = </math> body waterplane area  = <math>B</math>  (Beam in two dimensions)</center>
 
 
<center><math> \left( C_{44} \right)_G = \rho g \frac{B^3}{12} = \ </math> Roll restoring moment due to a small angular displacement </center>
 
<center> about the center of gravity. Verify for all wall and non-wall sided sections </center> 
 
 
<center><math> C_{44} \equiv \left( C_{44} \right)+G \ne \left( C_{44} \right)_O; \quad </math> Derive an expression for <math> \ \left( C_{44} \right)_O \ </math> in terms of <math> \ \left( C_{44} \right)_G. </math></center>
 
  
 
== Symmetry-reciprocity relations ==
 
== Symmetry-reciprocity relations ==
Line 205: Line 149:
 
<center><math> \iint_S \left( \psi_1 \frac{\partial\psi_2}{\partial n} - \psi_2 \frac{\partial\psi_1}{\partial n} \right) \mathrm{d}S = 0 \,</math></center>
 
<center><math> \iint_S \left( \psi_1 \frac{\partial\psi_2}{\partial n} - \psi_2 \frac{\partial\psi_1}{\partial n} \right) \mathrm{d}S = 0 \,</math></center>
 
where <math>\nabla^2 \psi_i=0</math>.
 
where <math>\nabla^2 \psi_i=0</math>.
 +
 +
{{energy_region_plates}}
  
 
[[Image:Symmetry_boundary.jpg|thumb|right|600px|Boundary]]
 
[[Image:Symmetry_boundary.jpg|thumb|right|600px|Boundary]]
Line 238: Line 184:
 
== Haskind relations of exciting forces ==
 
== Haskind relations of exciting forces ==
  
<center><math> \mathbf{X}_i(\omega) = - i\omega\rho\iint_{S_B} (\phi_I + \phi_7) n_i dS </math></center>
+
<center><math>  
 
+
\begin{align}
<center><math> - \rho \iint_{S_B} (\phi_I + \phi_7) \frac{\partial \phi_i}{\partial n} dS </math></center>
+
\mathbf{X}_i(\omega) &= - i\omega\rho\iint_{S_B} (\phi_I + \phi_7) n_i \mathrm{d}S \\
 +
&= - \rho \iint_{S_B} (\phi_I + \phi_7) \frac{\partial \phi_i}{\partial n} \mathrm{d}S
 +
\end{align}
 +
</math></center>
  
 
where the radiation velocity potential <math> \phi_i \,</math> is known to satisfy:
 
where the radiation velocity potential <math> \phi_i \,</math> is known to satisfy:
Line 252: Line 201:
 
Both <math> \phi_i\,</math> and <math> \phi_7\,</math> satisfy the condition of outgoing waves at infinity. By virtue of [http://en.wikipedia.org/wiki/Green's_identities Green's second identity]
 
Both <math> \phi_i\,</math> and <math> \phi_7\,</math> satisfy the condition of outgoing waves at infinity. By virtue of [http://en.wikipedia.org/wiki/Green's_identities Green's second identity]
  
<center><math> \iint_{S_B} \phi_7 \frac{\partial\phi_i}{\partial n} dS = \iint_{S_B} \phi_i \frac{\partial\phi_7}{\partial n} dS = -\iint_{S_B} \phi_i \frac{\partial\phi_I}{\partial n} dS </math></center>
+
<center><math> \iint_{S_B} \phi_7 \frac{\partial\phi_i}{\partial n} \mathrm{d}S = \iint_{S_B} \phi_i \frac{\partial\phi_7}{\partial n} \mathrm{d}S = -\iint_{S_B} \phi_i \frac{\partial\phi_I}{\partial n} \mathrm{d}S </math></center>
  
 
The Haskind expression for the exciting force follows:
 
The Haskind expression for the exciting force follows:
  
<center><math> \mathbf{X}_i(\omega) = \rho \iint_{S_B} \left[ \phi_I \frac{\partial\phi_i}{\partial n} - \phi_i \frac{\partial\phi_I}{\partial n} \right] dS </math></center>
+
<center><math> \mathbf{X}_i(\omega) = \rho \iint_{S_B} \left[ \phi_I \frac{\partial\phi_i}{\partial n} - \phi_i \frac{\partial\phi_I}{\partial n} \right] \mathrm{d}S </math></center>
  
The symmetry of the <math> A_ij(\omega), B_ij(\omega) \,</math> matrices applies in 2D and 3D. The application of Green's Theorem in 3D is very similar using the far-field representation for the potential <math> \phi_j\,</math>
+
The symmetry of the <math> A_{ij}(\omega), B_{ij}(\omega) \,</math> matrices applies in 2D and 3D. The application of Green's Theorem in 3D is very similar using the far-field representation for the potential <math> \phi_j\,</math>
  
 
<center><math> \phi_j \sim \frac{A_j(\theta)}{\sqrt{R}} e^{KZ-iKR} + O\left(\frac{1}{R^{3/2}}\right) </math></center>
 
<center><math> \phi_j \sim \frac{A_j(\theta)}{\sqrt{R}} e^{KZ-iKR} + O\left(\frac{1}{R^{3/2}}\right) </math></center>
Line 272: Line 221:
 
These take the form:
 
These take the form:
  
<u>2D</u>:      <math> B_ii = \frac{\left| \mathbf{X}_i \right|^2}{2\rho g V_g}, \quad V_g = \frac{g}{2\omega}, </math>      Deep water
+
<u>2D</u>:      <math> B_{ii} = \frac{\left| \mathbf{X}_i \right|^2}{2\rho g V_g}, \quad V_g = \frac{g}{2\omega}, </math>      Deep water
  
<u>3D</u>:      <math> B_33 = \frac{K}{4\rho g V_g} \left| \mathbf{X}_3 \right|^2 \,</math>      --- Heave
+
<u>3D</u>:      <math> B_{33} = \frac{K}{4\rho g V_g} \left| \mathbf{X}_3 \right|^2 \,</math>      --- Heave
  
(Axisymmetric bodies)      <math> B_22 = \frac{K}{8\rho g V_g} \left| \mathbf{X}_2 \right|^2 \,</math>      --- Sway
+
(Axisymmetric bodies)      <math> B_{22} = \frac{K}{8\rho g V_g} \left| \mathbf{X}_2 \right|^2 \,</math>      --- Sway
  
 
So knowledge of <math> \mathbf{X}_i(\omega)\,</math> allows the direct evaluation of the diagonal damping coefficients. These expressions are useful in deriving theoretical results in wave-body interactions to be discussed later.
 
So knowledge of <math> \mathbf{X}_i(\omega)\,</math> allows the direct evaluation of the diagonal damping coefficients. These expressions are useful in deriving theoretical results in wave-body interactions to be discussed later.
Line 286: Line 235:
 
<center><math> \sum_{j=1}^6 \left[ - \omega^2 \left( M_{ij} + A_{ij} \right) + i \omega B_{ij} + C_{ij} \right] \Pi_j = \mathbf{X}_j, \quad i=1,\cdots,6 </math></center>
 
<center><math> \sum_{j=1}^6 \left[ - \omega^2 \left( M_{ij} + A_{ij} \right) + i \omega B_{ij} + C_{ij} \right] \Pi_j = \mathbf{X}_j, \quad i=1,\cdots,6 </math></center>
  
Where:
+
where
  
<center><math> \mbox{Body inertia matrix including moments of inertia for rotational modes. For details refer to MH} \, </math></center>
+
<center><math> M_{ij}: \mbox{Body inertia matrix including moments of inertia for rotational modes. For details refer to MH} \, </math></center>
  
 
<center><math> A_{ij}(\omega): \mbox{Added mass matrix} \,</math></center>
 
<center><math> A_{ij}(\omega): \mbox{Added mass matrix} \,</math></center>
Line 308: Line 257:
 
Body-boundary conditions:
 
Body-boundary conditions:
  
<center><math> \frac{\partial\phi_7}{\partial n} = -\frac{\partial\phi_I}{\partial n}, \quad \mbox{on} \quad S_B </math></center>
+
<center><math>  
 +
\begin{align}
 +
\frac{\partial\phi_7}{\partial n} &= -\frac{\partial\phi_I}{\partial n}, \quad \mbox{on} \quad S_B \\
 +
\phi_I &= \frac{i g A}{\omega} e^{Kz-iKx\cos\beta-iKy\sin\beta+i\omega t} \\
 +
\frac{\partial\phi_j}{\partial n} &= i\omega n_j, \quad j=1,\cdots,6 \, \\
 +
n_j &= \begin{cases}
 +
  n_j, & j=1,2,3 \\
 +
  \left( \vec{x} \times \vec{n} \right), & j=4,5,6
 +
\end{cases}
 +
\end{align}
 +
</math></center>
  
<center><math> \phi_I = \frac{i g A}{\omega} e^{KZ-iKX\cos\beta-iKY\sin\beta+i\omega t} </math></center>
+
<center><math> j=1: \ \mbox{Surge} \qquad j=2: \ \mbox{Sway} \qquad j=3: \ \mbox{Heave} </math></center>
 
+
<center><math> j=4: \ \mbox{Roll} \qquad j=5: \ \mbox{Pitch} \qquad j=6: \ \mbox{Yaw} </math></center>
<center><math> \frac{\partial\phi_j}{\partial n} = i\omega n_j, \quad j=1,\cdots,6 \, </math></center>
 
 
 
<center><math> n_j = \begin{Bmatrix}
 
  & n_j, \qquad & j=1,2,3 \\
 
  & \left( \vec{X} \times \vec{n} \right)_{j+3}, \quad j=4,5,6
 
\end{Bmatrix} </math></center>
 
 
 
<center><math> i=1: \ \mbox{Surge} \qquad i=2: \ \mbox{Sway} \qquad i=3: \ \mbox{Heave} </math></center>
 
<center><math> i=4: \ \mbox{Roll} \qquad i=5: \ \mbox{Pitch} \qquad i=6: \ \mbox{Yaw} </math></center>
 
  
 
At large distances from the body the velocity potentials satisfy the radiation condition:
 
At large distances from the body the velocity potentials satisfy the radiation condition:
  
<center><math> \phi_j (R,\theta) \sim \frac{A_j(\theta)}{\sqrt{R}} e^{KZ-iKR} + O \left( \frac{1}{R^{3/2}} \right) </math></center>
+
<center><math> \phi_j (R,\theta) \sim \frac{A_j(\theta)}{\sqrt{R}} e^{Kz-iKR} + O \left( \frac{1}{R^{3/2}} \right) </math></center>
  
 
with
 
with
Line 390: Line 340:
 
The behavior of the Sway response can be found in an analagous manner,
 
The behavior of the Sway response can be found in an analagous manner,
  
== Estimating the Heave and Pitch resonant frequencies ==
 
 
Often it is useful to estimate the Heave and Pitch resonant frequencies in terms of the principal dimensions of a body.
 
 
=== Two dimensions ===
 
 
The Heave added mass <math> A_{33}, \, </math> is often not too far from its infinite frequency limit, or:
 
<center><math> A_{33} \simeq A_{33}(\infty) = \frac{1}{2} \rho \forall </math></center>
 
For a box-like section with beam <math>B\,</math> and draft <math>T\,</math>:
 
 
<center><math> A_{33} \simeq \frac{1}{2} \rho BT = \frac{1}{2} M \, </math></center>
 
 
<center><math> \omega^2 = \frac{\rho g B}{\rho BT + \frac{1}{2} \rho B T }= \frac{3}{2} \frac{g}{T} \, </math></center>
 
 
or:
 
 
<center><math> \omega^* \simeq \left( \frac{3}{2} \frac{g}{T} \right)^{\frac{1}{2}}</math></center>
 
 
We can derive corresponding result for Roll
 
 
===Three dimensions ===
 
 
The extension to a 3D body of general shape is easy in principle
 
 
For a ship like body with length large relative to its beam, <math> B\,</math>, we may approximate its shape as a barge with length <math>L\,</math>, Beam <math>B\,</math> and draft <math> T\,</math>. In this case the 2D analysis is very accurate.
 
 
We can prove that the same resonant frequency <math> \omega^*\,</math> is applicable to the Pitch motion of the barge as well. So Heave & Pitch resonate at the same frequency. This result is very well verified by 3D computations.
 
 
Similar arguments apply to the Roll motion of a ship approximated as a box-like body. The resonant frequency from a 2D analysis is very close to the Roll resonant frequency for a slender ship.
 
  
 
-----
 
-----

Latest revision as of 12:58, 26 April 2011

Wave and Wave Body Interactions
Current Chapter Linear Wave-Body Interaction
Next Chapter Long Wavelength Approximations
Previous Chapter Ship Kelvin Wake



Rigid body motions

We consider a Linear Plane Progressive Regular Wave in the Frequency Domain interacting with a floating body in two dimensions (the main concepts survive almost with no change in the more practical three-dimensional problem).

Introduction

We derive here the equations of motion for a body in Linear Plane Progressive Regular Waves in the frequency domain in two dimensions. We begin with the equations in the time domian. The simplest problems is Waves reflecting off a vertical wall

Equations for a Floating Body in the Time Domain

We begin with the equations for a floating two-dimensional body in the time domain.

The equations of motion in the time domain are Laplace's equation through out the fluid

[math]\displaystyle{ \Delta\Phi\left( \mathbf{x,}t\right) =0,\ \ \mathbf{x}\in\Omega. }[/math]

At the bottom surface we have no flow

[math]\displaystyle{ \partial_{n}\Phi=0,\ \ z=-h. }[/math]

At the free surface we have the kinematic condition

[math]\displaystyle{ \partial_{t}\zeta=\partial_{n}\Phi,\ \ z=0,\ x\in \partial\Omega_{F}, }[/math]

and the dynamic condition (the linearized Bernoulli equation)

[math]\displaystyle{ \partial_{t}\Phi = -g\zeta ,\ \ z=0,\ x\in \partial\Omega_{F}. }[/math]

The body boundary condition for a floating body is given in terms of the 3 rigid body motions, namely surge, heave and pitch which are indexed as [math]\displaystyle{ \nu=1,3,5 }[/math] in order to be consistent with the three-dimensional problem. We have a kinematic condition

[math]\displaystyle{ \partial_{n}\Phi=\sum_{\nu}\partial_t \xi_{\nu}\mathbf{n}_{\nu},\ \mathbf{x}\in\partial\Omega_{B}, }[/math]

where [math]\displaystyle{ \xi_{\nu} }[/math] is the motion of the [math]\displaystyle{ \mu }[/math]th mode and [math]\displaystyle{ \mathbf{n}_{\nu} }[/math] is the normal associated with this mode. Note that we define all normal derivatives to point out of the fluid. The dynamic condition is the equation of motion for the structure:

[math]\displaystyle{ \sum_{\nu} M_{\mu\nu}\partial_t^2 \xi_{\nu}=-\rho\iint_{\partial\Omega_{B}}\partial_t\Phi n_{\mu}\, dS - \sum_{\nu} C_{\mu\nu}\xi_{\nu},\quad \textrm{for} \qquad \mu=1,3,5, }[/math]

In this equation, [math]\displaystyle{ M_{\mu\nu} }[/math] are the elements of the mass matrix

[math]\displaystyle{ \mathbf{M}=\left[ \begin{matrix} M & 0 & M(z^c-Z^R) \\ 0 & M & -M(x^c-X^R) \\ M(z^c-Z^R)& -M(x^c-X^R) & I^b_{11}+I^b_{33} \end{matrix} \right] , }[/math]

for the structure and [math]\displaystyle{ c_{\mu\nu} }[/math] are the elements of the buoyancy matrix

[math]\displaystyle{ \mathbf{C}=\left[ \begin{matrix} 0 & 0 & 0 \\ 0 & \rho g W & -\rho g I^A_{1} \\ 0 & -\rho g I^A_{1} & \rho g (I^A_{11}+I^V_3)-Mg(z^c-Z^R) \end{matrix} \right]. }[/math]

The terms [math]\displaystyle{ I^b_{11} }[/math], [math]\displaystyle{ I^b_{33} }[/math] are the moments of inertia of the body about the [math]\displaystyle{ x }[/math] and [math]\displaystyle{ z }[/math] axes and the terms [math]\displaystyle{ I_1^{A} }[/math], [math]\displaystyle{ I^{A}_{11} }[/math] are the first and second moments of the waterplane (the waterplane area is denoted [math]\displaystyle{ W }[/math]) about the [math]\displaystyle{ x }[/math]-axis (see Chapter 7, Mei 1983). In addition, [math]\displaystyle{ (x^c,z^c) }[/math] and [math]\displaystyle{ (X^R,Z^R) }[/math] are the positions of the centre of mass and centre of rotation of the body and [math]\displaystyle{ I^{V}_{3} }[/math] is [math]\displaystyle{ z }[/math]-component centre of buoyancy of the structure. Thus, the coupled equations of motion for a floating structure have been derived. (N.B. if is assumed that the centre of rotation and the centre of mass of the structure coincide, i.e. if it is assumed that the body is semi-submerged, the mass and buoyancy matrices become diagonal). Any wave incidence is assumed to be propagating in the positive [math]\displaystyle{ x }[/math] direction.) The scattering and radiation problems are simpler than the coupled problem because the motion of the the structure is then prescribed.

More details can be found in Time-Dependent Linear Water Waves

Equations for a Floating Body in the Frequency Domain

The dynamic condition is the equation of motion for the structure in the frequency domain can be found from the time domain equations and we introduce the following notation

[math]\displaystyle{ \xi_{\nu} = \zeta_{\nu}e^{-\mathrm{i}\omega t}\, }[/math]

This give us

[math]\displaystyle{ \begin{align} \Delta\phi &=0, &-h\lt z\lt 0,\,\,\mathbf{x} \in \Omega \\ \partial_z\phi &= 0, &z=-h, \\ \partial_z \phi &= \alpha \phi, &z=0,\,\,\mathbf{x} \in \partial \Omega_{\mathrm{F}}, \end{align} }[/math]


(note that the last expression can be obtained from combining the expressions:

[math]\displaystyle{ \begin{align} \partial_z \phi &= -\mathrm{i} \omega \zeta, &z=0,\,\,\mathbf{x} \in \partial \Omega_{\mathrm{F}}, \\ \mathrm{i} \omega \phi &= g\zeta, &z=0,\,\,\mathbf{x} \in \partial \Omega_{\mathrm{F}}, \end{align} }[/math]

where [math]\displaystyle{ \alpha = \omega^2/g \, }[/math])

[math]\displaystyle{ -\omega^2 \sum_{\nu} M_{\mu\nu}\zeta_{\nu}=\mathrm{i}\omega\rho\iint_{\partial\Omega}\phi n_{\mu}\, \mathrm{d}S - \sum_{\nu} C_{\mu\nu}\zeta_{\nu},\quad \textrm{for} \qquad \mu=1,3,5, }[/math]

The equations of motion for [math]\displaystyle{ \zeta_\nu\, }[/math] follow from Newton's law applied to each mode in two dimensions. The same principles apply with very minor changes in three dimensions. We use the standard numbering of the modes of motion.

Equations for a Fixed Body in Frequency Domain

The equations for a fixed body are

[math]\displaystyle{ \begin{align} \Delta\phi &=0, &-h\lt z\lt 0,\,\,\mathbf{x} \in \Omega \\ \partial_z\phi &= 0, &z=-h, \\ \partial_z \phi &= \alpha \phi, &z=0,\,\,\mathbf{x} \in \partial \Omega_{\mathrm{F}}, \end{align} }[/math]


(note that the last expression can be obtained from combining the expressions:

[math]\displaystyle{ \begin{align} \partial_z \phi &= -\mathrm{i} \omega \zeta, &z=0,\,\,\mathbf{x} \in \partial \Omega_{\mathrm{F}}, \\ \mathrm{i} \omega \phi &= g\zeta, &z=0,\,\,\mathbf{x} \in \partial \Omega_{\mathrm{F}}, \end{align} }[/math]

where [math]\displaystyle{ \alpha = \omega^2/g \, }[/math]) The body boundary condition for a rigid body is just

[math]\displaystyle{ \partial_{n}\phi=0,\ \ \mathbf{x}\in\partial\Omega_{\mathrm{B}}, }[/math]

plus the radiation conditions.

We decompose the potential as [math]\displaystyle{ \phi = \phi^{\mathrm{I}} + \phi^{\mathrm{D}} \,, }[/math] where [math]\displaystyle{ \phi^{\mathrm{I}} }[/math] is the incident potential and [math]\displaystyle{ \phi^{\mathrm{D}} }[/math] is the diffracted potential. The boundary condition for the diffracted potential is

[math]\displaystyle{ \begin{align} \Delta\phi^{\mathrm{D}}&=0, &-h\lt z\lt 0,\,\,\mathbf{x} \in \Omega \\ \partial_n\phi^{\mathrm{D}} &= 0, &z=-h, \\ \partial_n \phi^{\mathrm{D}} &= \alpha \phi, &z=0,\,\,\mathbf{x} \in \partial\Omega_{F}, \end{align} }[/math]

plus

[math]\displaystyle{ \partial_n \phi^{\mathrm{D}} = - \partial_n \phi^{\mathrm{I}},\,\, \mathbf{x} \in \partial\Omega_{B}, }[/math]

Code to calculate the solution (using a slighly modified method) can be found in Boundary Element Method for a Fixed Body in Finite Depth

Equations for the Radiation Potential in Frequency Domain

We decompose the body motion into the rigid body modes of motion. Associated with each of these modes is a potential which must be solved for. The equations for the radiation potential in the frequency domain are

[math]\displaystyle{ \begin{align} \Delta\phi &=0, &-h\lt z\lt 0,\,\,\mathbf{x} \in \Omega \\ \partial_z\phi &= 0, &z=-h, \\ \partial_z \phi &= \alpha \phi, &z=0,\,\,\mathbf{x} \in \partial \Omega_{\mathrm{F}}, \end{align} }[/math]


(note that the last expression can be obtained from combining the expressions:

[math]\displaystyle{ \begin{align} \partial_z \phi &= -\mathrm{i} \omega \zeta, &z=0,\,\,\mathbf{x} \in \partial \Omega_{\mathrm{F}}, \\ \mathrm{i} \omega \phi &= g\zeta, &z=0,\,\,\mathbf{x} \in \partial \Omega_{\mathrm{F}}, \end{align} }[/math]

where [math]\displaystyle{ \alpha = \omega^2/g \, }[/math]) The body boundary condition for a radiation mode [math]\displaystyle{ m }[/math] is just

[math]\displaystyle{ \partial_{n}\phi=\mathbf{n}_\nu,\ \ \mathbf{x}\in\partial\Omega_{\mathrm{B}}, }[/math]

where [math]\displaystyle{ \mathbf{n}_{\nu} }[/math] is the normal derivative of the [math]\displaystyle{ \nu }[/math] mode on the body surface directed out of the fluid.

In two-dimensions the Sommerfeld Radiation Condition is

[math]\displaystyle{ \left( \frac{\partial}{\partial|x|}-k_0\right) \phi=0,\;\mathrm{{as\;}}|x|\rightarrow\infty\mathrm{.} }[/math]

Code to calculate the radiation potential can be found in Boundary Element Method for the Radiation Potential in Finite Depth

We denote the solution for each of the radiation potentials by [math]\displaystyle{ \phi_\nu^{\mathrm{R}} }[/math] and the total potential is written as

[math]\displaystyle{ \phi = \phi^{\mathrm{I}} + \phi^{\mathrm{D}} - \mathrm{i} \omega \sum_\nu \zeta_\nu \phi_\nu^{\mathrm{R}} }[/math]

Final System of Equations

We substitute the expansion for the potential into the equations in the frequency domain and we obtain

[math]\displaystyle{ -\omega^2 \sum_{\nu} M_{\mu\nu}\zeta_{\nu}=\mathrm{i}\omega\rho\iint_{\partial\Omega_{B}} \left(\phi^{\mathrm{I}} + \phi^{\mathrm{D}} - \mathrm{i}\omega \sum_{\nu} \zeta_\nu \phi_{\nu}^{\mathrm{R}}\right) \mathbf{n}_{\mu}\, dS - \sum_{\nu} C_{\mu\nu}\xi_{\nu},\quad \textrm{for} \qquad \mu=1,3,5, }[/math]

We define the added mass matrix by

[math]\displaystyle{ A_{\mu\nu} = \mathrm{Re} \left\{\rho\iint_{\partial\Omega_{B}} \phi_{\nu}^{\mathrm{R}} \mathbf{n}_{\mu}\, dS \right\} }[/math]

and the damping matrix by

[math]\displaystyle{ B_{\mu\nu} = \mathrm{Im} \left\{ \omega \rho\iint_{\partial\Omega_{B}} \phi_{\nu}^{\mathrm{R}} \mathbf{n}_{\mu}\, dS \right\} }[/math]

and the forcing vector by

[math]\displaystyle{ f_{\mu} = \mathrm{i}\omega\rho\iint_{\partial\Omega_{B}} \left(\phi^{\mathrm{I}} + \phi^{\mathrm{D}} \right) \mathbf{n}_{\mu}\, dS }[/math]

Then the equations can be expressed as follows.

[math]\displaystyle{ \left[-\omega^2 \left(\mathbf{M} + \mathbf{A} \right) - \mathrm{i}\omega \mathbf{B} + \mathbf{C} \right] \vec{\zeta} = \mathbf{f} }[/math]

where [math]\displaystyle{ \mathbf{M} }[/math] is the mass matrix, [math]\displaystyle{ \mathbf{A} }[/math] is the added mass matrix, [math]\displaystyle{ \mathbf{B} }[/math] is the damping matrix, [math]\displaystyle{ \mathbf{C} }[/math] is the hydrostatic matrix, [math]\displaystyle{ \vec{\zeta} }[/math] is the vector of body displacements and [math]\displaystyle{ \mathbf{f} }[/math] is the force.


The extension of these equations to six degrees of freedom is straightforward. However before discussing the general case we will study specific properties of the two dimensional problem for the sake of clarity.

Symmetric body

For a body which is Symmetric in Two Dimensions the Heave is decoupled from Surge and Roll. In other words the Surge and Roll motions do not influence Heave and vice versa.

Matlab Code

  • A program to solve for pitch and heave and only for two geometries can be found here rigid_body_motion.m
  • a program to calculate the solution for a specific geometry (with plot as output as shown) can be found here wave_bem_example_floating.m
The reflection (solid line) and transmission (dashed line) for a dock for heave and pitch (red), heave only (blue) and pitch only (black)

Additional code

This program requires

Symmetry-reciprocity relations

It will be shown that

[math]\displaystyle{ A_{ij}(\omega) = A_{ji}(\omega) \, }[/math]
[math]\displaystyle{ B_{ij}(\omega) = B_{ji}(\omega) \, }[/math]

Along the same lines it will be shown that the exciting force [math]\displaystyle{ \mathbf{X}_j\, }[/math] can be expressed in terms of [math]\displaystyle{ \psi_j\, }[/math] circumventing the solution for the diffraction potential. The core result needed for the proof of the above properties is Green's second identity

[math]\displaystyle{ \iint_S \left( \psi_1 \frac{\partial\psi_2}{\partial n} - \psi_2 \frac{\partial\psi_1}{\partial n} \right) \mathrm{d}S = 0 \, }[/math]

where [math]\displaystyle{ \nabla^2 \psi_i=0 }[/math].

A diagram depicting the area [math]\displaystyle{ \Omega }[/math] which is bounded by the rectangle [math]\displaystyle{ \partial\Omega }[/math].The rectangle [math]\displaystyle{ \partial\Omega }[/math] is bounded by [math]\displaystyle{ -h\leq z \leq0 }[/math] and [math]\displaystyle{ -\infty/-N\leq x \leq N/\infty }[/math]
Boundary

In the surface wave-body problem define the closed surfaces as shown in figure on the right. Let [math]\displaystyle{ \phi_j\, }[/math] be rediation or diffraction potentials. Over the boundaries [math]\displaystyle{ S^\pm\, }[/math] we have:

[math]\displaystyle{ S^+: \quad \phi_j \ \sim \ \frac{igA_j^+}{\omega} e^{Kz-iKx} \, }[/math]
[math]\displaystyle{ \frac{\partial\phi_j}{\partial n} = \frac{\partial \phi_j}{\partial x} \ \sim \ -iK\phi_j \, }[/math]
[math]\displaystyle{ S^-: \quad \phi_j \ \sim \ \frac{igA_j^-}{\omega} e^{Kz+iKx} \, }[/math]
[math]\displaystyle{ \frac{\partial\phi_j}{\partial n} = - \frac{\partial \phi_j}{\partial x} \ \sim \ - iK\phi_j \, }[/math]

On [math]\displaystyle{ S_F: \qquad \frac{\partial\phi_j}{\partial z} = K\phi_j, \qquad \frac{\partial \Phi_j}{\partial n} = \frac{\partial \phi_j}{\partial z} }[/math]

On [math]\displaystyle{ S_\infty: \qquad \left| \phi_j \right|, \quad \left| \nabla \phi_j \right| \to 0 }[/math].

Applying Green's identity to any pair of the radiation potentials [math]\displaystyle{ \psi_i, \psi_j \, }[/math]:

[math]\displaystyle{ \iint_{S_B} \left[ \psi_i \frac{\partial\psi_j}{\partial n} - \psi_j \frac{\partial\psi_i}{\partial n} \right] \mathrm{d}S = - \iint_{S_F} \left[ \psi_i \frac{\partial\psi_j}{\partial z} - \psi_j \frac{\partial\psi_i}{\partial z} \right] \mathrm{d}S }[/math]
[math]\displaystyle{ - \iint_{S_+} \left[ \psi_i \frac{\partial\psi_j}{\partial x} - \psi_j \frac{\partial\psi_i}{\partial x} \right] \mathrm{d}S + \iint_{S_-} \left[ \psi_i \frac{\partial\psi_j}{\partial x} - \psi_j \frac{\partial\psi_i}{\partial x} \right] \mathrm{d}S = 0 }[/math]

It follows that:

[math]\displaystyle{ \iint_{S_B} \psi_i \frac{\partial\psi_j}{\partial n} \mathrm{d}S = \iint_{S_B} \psi_j \frac{\partial\psi_i}{\partial n} \mathrm{d}S }[/math]

or

[math]\displaystyle{ A_{ij}(\omega) = A_{ji}(\omega), \qquad B_{ij}(\omega) = B_{ji}(\omega). \, }[/math]

Haskind relations of exciting forces

[math]\displaystyle{ \begin{align} \mathbf{X}_i(\omega) &= - i\omega\rho\iint_{S_B} (\phi_I + \phi_7) n_i \mathrm{d}S \\ &= - \rho \iint_{S_B} (\phi_I + \phi_7) \frac{\partial \phi_i}{\partial n} \mathrm{d}S \end{align} }[/math]

where the radiation velocity potential [math]\displaystyle{ \phi_i \, }[/math] is known to satisfy:

[math]\displaystyle{ \frac{\partial\phi_i}{\partial n} = i\omega n_i, \quad \mbox{on} \ S_B }[/math]

and

[math]\displaystyle{ \frac{\partial\phi_7}{\partial n} = \frac{\partial\phi_I}{\partial n}, \quad \mbox{on} \ S_B }[/math]

Both [math]\displaystyle{ \phi_i\, }[/math] and [math]\displaystyle{ \phi_7\, }[/math] satisfy the condition of outgoing waves at infinity. By virtue of Green's second identity

[math]\displaystyle{ \iint_{S_B} \phi_7 \frac{\partial\phi_i}{\partial n} \mathrm{d}S = \iint_{S_B} \phi_i \frac{\partial\phi_7}{\partial n} \mathrm{d}S = -\iint_{S_B} \phi_i \frac{\partial\phi_I}{\partial n} \mathrm{d}S }[/math]

The Haskind expression for the exciting force follows:

[math]\displaystyle{ \mathbf{X}_i(\omega) = \rho \iint_{S_B} \left[ \phi_I \frac{\partial\phi_i}{\partial n} - \phi_i \frac{\partial\phi_I}{\partial n} \right] \mathrm{d}S }[/math]

The symmetry of the [math]\displaystyle{ A_{ij}(\omega), B_{ij}(\omega) \, }[/math] matrices applies in 2D and 3D. The application of Green's Theorem in 3D is very similar using the far-field representation for the potential [math]\displaystyle{ \phi_j\, }[/math]

[math]\displaystyle{ \phi_j \sim \frac{A_j(\theta)}{\sqrt{R}} e^{KZ-iKR} + O\left(\frac{1}{R^{3/2}}\right) }[/math]
[math]\displaystyle{ \frac{\partial\phi_j}{\partial n} = \frac{\partial\phi_j}{\partial R} \sim - i K \phi_j + O\left(\frac{1}{R^{3/2}}\right) }[/math]

where [math]\displaystyle{ R \, }[/math] is a radius from the body out to infinity and the [math]\displaystyle{ R^{-\frac{1}{2}} \, }[/math] decay arises from the energy conservation principle. Details of the 3D proof may be found in Mei 1983 and Wehausen and Laitone 1960

The use of the Haskind relations for the exciting forces does not require the solution of the diffraction problem. This is convenient and often more accurate.

The Haskind relations take other forms which will not be presented here but are detailed in Wehausen and Laitone 1960. The ones that are used in practice relate the exciting forces to the damping coefficients.

These take the form:

2D: [math]\displaystyle{ B_{ii} = \frac{\left| \mathbf{X}_i \right|^2}{2\rho g V_g}, \quad V_g = \frac{g}{2\omega}, }[/math] Deep water

3D: [math]\displaystyle{ B_{33} = \frac{K}{4\rho g V_g} \left| \mathbf{X}_3 \right|^2 \, }[/math] --- Heave

(Axisymmetric bodies) [math]\displaystyle{ B_{22} = \frac{K}{8\rho g V_g} \left| \mathbf{X}_2 \right|^2 \, }[/math] --- Sway

So knowledge of [math]\displaystyle{ \mathbf{X}_i(\omega)\, }[/math] allows the direct evaluation of the diagonal damping coefficients. These expressions are useful in deriving theoretical results in wave-body interactions to be discussed later.

The two-dimensional theory of wave-body interactions in the frequency domain extends to three dimencions very directly with little difficulty.

The statement of the 6 d.o.f. seakeeping problem is:

[math]\displaystyle{ \sum_{j=1}^6 \left[ - \omega^2 \left( M_{ij} + A_{ij} \right) + i \omega B_{ij} + C_{ij} \right] \Pi_j = \mathbf{X}_j, \quad i=1,\cdots,6 }[/math]

where

[math]\displaystyle{ M_{ij}: \mbox{Body inertia matrix including moments of inertia for rotational modes. For details refer to MH} \, }[/math]
[math]\displaystyle{ A_{ij}(\omega): \mbox{Added mass matrix} \, }[/math]
[math]\displaystyle{ B_{ij}(\omega): \mbox{Damping matrix} \, }[/math]
[math]\displaystyle{ C_{ij}: \mbox{Hydrostatic and static inertia restoring matrix. For details refer to MH} \, }[/math]
[math]\displaystyle{ \mathbf{X}_i(\omega): \mbox{Wave exciting forces and moments} }[/math]

At zero speed the definitions of the added-mass, damping matrices and exciting forces are identical to those in two dimensions.

The boundary value problems satisfied by the radiation potentials [math]\displaystyle{ \phi_j, \ j=1,\cdots,6 \, }[/math] and the diffraction potential [math]\displaystyle{ \phi_7 \, }[/math] are as follows:

Free-surface condition:

[math]\displaystyle{ -\omega^2 \phi_j + g \frac{\partial\phi_j}{\partial Z} = 0, \quad z=0 \quad j=1,\cdots,7 }[/math]

Body-boundary conditions:

[math]\displaystyle{ \begin{align} \frac{\partial\phi_7}{\partial n} &= -\frac{\partial\phi_I}{\partial n}, \quad \mbox{on} \quad S_B \\ \phi_I &= \frac{i g A}{\omega} e^{Kz-iKx\cos\beta-iKy\sin\beta+i\omega t} \\ \frac{\partial\phi_j}{\partial n} &= i\omega n_j, \quad j=1,\cdots,6 \, \\ n_j &= \begin{cases} n_j, & j=1,2,3 \\ \left( \vec{x} \times \vec{n} \right), & j=4,5,6 \end{cases} \end{align} }[/math]
[math]\displaystyle{ j=1: \ \mbox{Surge} \qquad j=2: \ \mbox{Sway} \qquad j=3: \ \mbox{Heave} }[/math]
[math]\displaystyle{ j=4: \ \mbox{Roll} \qquad j=5: \ \mbox{Pitch} \qquad j=6: \ \mbox{Yaw} }[/math]

At large distances from the body the velocity potentials satisfy the radiation condition:

[math]\displaystyle{ \phi_j (R,\theta) \sim \frac{A_j(\theta)}{\sqrt{R}} e^{Kz-iKR} + O \left( \frac{1}{R^{3/2}} \right) }[/math]

with

[math]\displaystyle{ K = \frac{\omega^2}{g}. \, }[/math]

This radiation condition is essential for the formulation and solution of the boundary value problems for [math]\displaystyle{ \phi_j\, }[/math] using panel methods which are the standard solution technique at zero and forward speed.

Qualitative behaviour of the forces, coefficients and motions of floating bodies

[math]\displaystyle{ - \omega^2 \phi + g \phi_Z =0 \quad \begin{cases} \phi_Z=0,\quad \omega=0 \\ \phi=0, \quad \omega \to \infty \end{cases} }[/math]
[math]\displaystyle{ B_{33}(\omega), \sim \omega, \mbox{at low} \ \omega \, }[/math]

The 2D Heave added mass is singular at low frequencies. It is finite in 3D

The 2D Heave damping coefficient is decaying to zero linearly in 2D and superlinearly in 3D. A two-dimensional section is a better wavemaker than a three-dimensional one

A 2D section oscillating in Sway is less effective a wavemaker at low frequencies than the same section oscillating in Heave

The zero-frequency limit of the Sway added mass is finite and similar to the infinite frequency limit of the Heave added mass.

In long waves the Heave exciting force tends to the Heave restoring coefficient times the ambient wave amplitude the free surface behaves like a flat surface moving up and down.

In long waves the Sway exciting force tends to zero. Proof will follow

In short waves all forces tend to zero.

Pitch exciting moment (same applies to Roll) tends to zero. Long waves have a small slope which is proportional to [math]\displaystyle{ KA }[/math], where [math]\displaystyle{ K\, }[/math] is the wave number and [math]\displaystyle{ A\, }[/math] is the wave amplitude.

Prove that to leading order for [math]\displaystyle{ KA\to 0 \, }[/math]:

[math]\displaystyle{ \left| X_S(\omega) \right| \sim KA C_{55}\, }[/math]

where [math]\displaystyle{ C_{55}\, }[/math] is the Pitch ([math]\displaystyle{ C_{44} \, }[/math] for Roll) hydrostatic restoring coefficient. [NB: very long waves look like a flat surface inclined at [math]\displaystyle{ KA\, }[/math] ].

Body motions in regular waves

Heave:

[math]\displaystyle{ \Pi_3 = \frac{\mathbf{X}_3(\omega)}{-\omega^2(A_{33} + M) + i\omega B_{33} +C_{33} } }[/math]

Resonance:

[math]\displaystyle{ \omega^2 = \frac{C_{33}}{M+A_{33}} = \frac{\rho g A \omega}{M + A_{33} (\omega)} }[/math]

In principle the above equation is nonlinear for [math]\displaystyle{ \omega\, }[/math]. Will be approximated below

At resonance:

[math]\displaystyle{ \Pi_3 = \frac{\mathbf{X}_3(\omega^*)}{i\omega^* B_{33}(\omega^*)} \, }[/math]

Invoking the relation between the damping coefficient and the exicting force in 3D:

[math]\displaystyle{ \frac{\left| \Pi_3 \right|}{A} = \frac{\left| \mathbf{X}_3(\omega) \right|}{\omega \frac{K}{4\rho g V_g} \left| \mathbf{X}_3 \right|^2}, \quad V_g=\frac{g}{2\omega} }[/math]
[math]\displaystyle{ =\frac{2\rho g}{\omega^3 \left|\mathbf{X}_3(\omega)\right|}, \quad \mbox{at resonance} }[/math]

This counter-intuitive result shows that for a body undergoing a pure Heave oscillation, the modulus of the Heave response at resonance is inversely proportional to the modulus of the Heave exciting force.

Viscous effects not discussed here may affect Heave response at resonance

The behavior of the Sway response can be found in an analagous manner,



This article is based on the MIT open course notes and the original articles can be found here and here