Linear and Second-Order Wave Theory

From WikiWaves
Revision as of 08:10, 23 January 2007 by Syan077 (talk | contribs)
Jump to navigationJump to search

Linerization of Free-surface Conditions

On earth the gravitational acceleration is large enough that the restoring role it plays leads to small wave slopes in most, but not all, cases.

So it is often a very good assumption to set

[math]\displaystyle{ | \nabla \zeta | = O (\epsilon) }[/math]

Where [math]\displaystyle{ \epsilon }[/math] is a small parameter. This invites the use of the very powerful tools of perturbation theory.

Let:

[math]\displaystyle{ \epsilon = \epsilon_1 + \epsilon_2 + \epsilon_3 + \cdots }[/math]
[math]\displaystyle{ \Phi = \Phi_1 + \Phi_2 + \Phi_3 + \cdots }[/math]

And derive boundary value problems for [math]\displaystyle{ \epsilon_i,\Phi_i }[/math]. Rarely we need to go beyond [math]\displaystyle{ i = 3 }[/math].

Here we will derive the free-surface conditions up to second order.

The main technique is to expand the kinematic and dynamic free surface conditions about the [math]\displaystyle{ Z=0 }[/math] plane and derive statements for the unknown pairs [math]\displaystyle{ (\Phi_1,\zeta_1 }[/math] and [math]\displaystyle{ (\Phi_2, \zeta_2) }[/math] at [math]\displaystyle{ Z=0 }[/math]. Later on, the same technique will be used to linearize the body boundary condition at [math]\displaystyle{ U=0 }[/math] (zero speed) and [math]\displaystyle{ U\gt 0 }[/math] (forward speed).

Kinematic condition

[math]\displaystyle{ \left( \frac{\partial\zeta}{\partial t) + \nabla\Phi \cdots \nabla\zeta \right)_{Z=\zeta} = \left( \frac{\partial\Phi}{\partial Z} \right)_{Z=\zeta} }[/math]


[math]\displaystyle{ \left ( \frac{\partial \zeta}{\partial t} + \nabla \Phi \cdot \nabla \zeta \right )_{Z=\zeta} = \left ( \frac{\partial \Phi}{\partial Z} \right )_{Z=\zeta} }[/math]
[math]\displaystyle{ \left( \frac{\partial\zeta}{\partial t} + \nabla \Phi \cdot \nabla \zeta \right)_{Z=0} + \zeta \frac{\partial}{\partial Z} \left( \frac{\partial\zeta}{\partial t} + \nabla \Phi \cdot \nabla \zeta \right)_{Z=0} + \cdots }[/math]

[math]\displaystyle{ = \left( \frac{\partial\Phi}{\partial Z} \right)_{Z=0} + \zeta \left( \frac{\partial^2 \Phi}{\partial Z^2} \right)_{Z=0} + \cdots }[/math]

Dynamic condition


Linear problem:



Pressure from Bernoulli, constant terms set equal to zero, at a fixed point in the fluid domain at is given by:



Eliminating from the kinematic and dynamic free surface conditions, we obtain the classical linear free surface condition:


Note that on Z=0, in fact it can obtained from the expressions above in the form



So linear theory states that the linear perturbation pressure on the plane due to a surface wave disturbance is equal to the positive (negative) "hydrostatic" pressure induced by the positive (negative) wave elevation .

Second-order problem:



Alternatively, the known linear terms may be moved in the right-hand side as forcing functions, leading to:

Kinematic second-order condition:


Dynamic second-order condition:



The very attractive feature of second order surface wave theory is that it allows the prior solution of the linear problem which is often possible analytically and numerically.

The linear solution is then used as a forcing function for the solution of the second order problem. This is often possible analytically and in most cases numerically in the absence or presence of bodies/

Linear and second-order theories are very appropriate to use for the modeling of surface waves as stochastic processes.

Both theories are very useful in practice as will be demonstrated in many contexts in the present course, particucarly in conneltion with wave-body interactions.