Difference between revisions of "Trapped Modes"

From WikiWaves
Jump to navigationJump to search
Line 14: Line 14:
 
= Sloshing modes =
 
= Sloshing modes =
  
Content to be added.
+
The first examples of trapping structures were constructed by M. McIver (1996) using an inverse procedure. The structures are two-dimensional and have two surface-piercing elements. The sloshing trapped mode consists of a persistent oscillation of the fluid that is essentially confined to the region between the two elements of the structure.
 +
 
 +
Subsequent work by P. McIver & M. McIver (1997) established the existence of axisymmetric trapped modes in three-dimensional problems. The supporting structures are surface-piercing toroids and the fluid motion is essentially confined to the central hole. It is now clear that trapping structures can be constructed almost at will. For example, subsequent work on the three-dimensional problem has established the existence of non-axisymmetric sloshing trapped modes supported by both axisymmetric and non-axisymmetric structures (Kuznetsov & P. McIver 1997, P. McIver & Newman 2003). Further, convincing numerical evidence has been obtained for the existence of submerged trapping structures in both the two- and three-dimensional problems (M. McIver 2000, M. McIver & Porter 2002).
  
 
= Motion modes =
 
= Motion modes =

Revision as of 14:21, 1 August 2006

Introduction

These notes describe some mathematical results on the linearised problem of the interaction of water waves with a freely-floating structure in open water. Conventionally, this problem is solved by first taking a Fourier Transform in Time, and then decomposing the resulting Frequency Domain Problem into the so-called scattering and radiation problems. In the scattering problem the structure is held fixed in incident waves of a prescribed frequency. In the radiation problem the incident waves are removed and the structure is forced to oscillate at a prescribed frequency. The scattering and radiation problems are closely related and differ only by the "forcing" boundary condition imposed on the surface of the structure. The two problems are linked through the equations of motion for the freely-floating structure.

The uniqueness of solutions in the frequency-domain to the scattering and radiation problems has been a subject of research since at least the early 1950's. In a seminal paper, John 1950 established uniqueness for a particular class of geometries and since that time many other partial results have been obtained (see, for example, Simon and Ursell 1984. Many (probably most) researchers in the field believed that it was only a matter of time before a general uniqueness proof would be obtained that was valid for any structural geometry and for all frequencies.

For a specified geometry, uniqueness of the solution to a forcing problem at a particular frequency is equivalent to the non-existence of a trapped mode at that frequency. A trapped mode is a solution of the corresponding homogeneous problem and represents a free oscillation with finite energy of the fluid surrounding the fixed structure. For a given structure, trapped modes may exist only at discrete frequencies. Mathematically, a trapped mode corresponds to an eigenvalue embedded in the continuous spectrum of the relevant operator.

The reason for the absence of a general uniqueness proof became clear when McIver 1996 showed how to construct fixed structures that support a trapped mode at a particular frequency. Subsequently, quite a variety of trapping structures have been discovered. All of those found so far are characterised by one of more holes that essentially isolate a portion of the free surface. The fluid motion consists of a sloshing supported by the hole, and a decay to zero on paths directed away from the structure. Trapped modes supported by a fixed structure are termed here "sloshing modes".

McIver 2005 has pointed out that the study of the individual scattering and radiation problems does not provide direct information about the uniqueness of a solution to the problem for a freely-floating structure. In general, there is a unique solution for the problem of a freely-floating structure even at frequencies corresponding to the existence of sloshing trapped modes supported by the fixed structure. Conversely, it has been shown by McIver and McIver 2006 and McIver and McIver 2006b that the freely-floating structure can support trapped modes at frequencies for which the scattering and radiation problems have a unique solution. This latter type of trapped mode is a coupled motion of the fluid and structure that possesses finite energy; such modes will be termed here "motion modes".

Sloshing modes

The first examples of trapping structures were constructed by M. McIver (1996) using an inverse procedure. The structures are two-dimensional and have two surface-piercing elements. The sloshing trapped mode consists of a persistent oscillation of the fluid that is essentially confined to the region between the two elements of the structure.

Subsequent work by P. McIver & M. McIver (1997) established the existence of axisymmetric trapped modes in three-dimensional problems. The supporting structures are surface-piercing toroids and the fluid motion is essentially confined to the central hole. It is now clear that trapping structures can be constructed almost at will. For example, subsequent work on the three-dimensional problem has established the existence of non-axisymmetric sloshing trapped modes supported by both axisymmetric and non-axisymmetric structures (Kuznetsov & P. McIver 1997, P. McIver & Newman 2003). Further, convincing numerical evidence has been obtained for the existence of submerged trapping structures in both the two- and three-dimensional problems (M. McIver 2000, M. McIver & Porter 2002).

Motion modes

Content to be added.