Template:Reflection and transmission coefficients BEM
Reflection and Transmission Coefficients
Recall that our Sommerfeld radiation condition can be expressed in the form
and that the potential in the region [math]\displaystyle{ \Omega }[/math] is of the form
Note that for this series, if [math]\displaystyle{ m=0 }[/math], then [math]\displaystyle{ k_m }[/math] is imaginary, giving rise to a propagating wave. For [math]\displaystyle{ m \geq 1 }[/math], there is only a local contribution to this propagating wave -- in the extremes, there is no contribution (evanescent modes).
So when looking at the Reflected and Transmitted waves, we only consider [math]\displaystyle{ m=0 }[/math], that is,
Consequently, it is straightforward to see that [math]\displaystyle{ R = a_0 e^{k_0 l} }[/math]. Recall from earlier that
therefore,
However, we make use of the fact that [math]\displaystyle{ \mathbf{Q}[f]=\mathbf{S}\,\mathbf{R}\,[f] }[/math], where the components of the matrix [math]\displaystyle{ \mathbf{R} }[/math] is
which admits the representation
Consequently,
So in summary, if we multiply the potential at the left (after subtracting the incident wave) and the right by
[math]\displaystyle{ \mathbf{R} }[/math] we can calculate the coefficients in the eigenfunction expansion, and
hence determine the reflection and transmission coefficient.
where [math]\displaystyle{ z_{j} }[/math] is the value of the [math]\displaystyle{ z }[/math] coordinate in the centre of the panel
and [math]\displaystyle{ \Delta x }[/math] is the panel length.